If you’ve been getting random BSODs and think it might be caused by the Netwsw02.sys file, there’s a way to fix it. This guide will show you how to replace the corrupted file with a clean one.
If you’ve been getting random BSODs (blue screen of death) errors on your Windows PC, it’s likely that the root cause is a driver file called netwsw02.sys. This file is part of the networking driver stack for Intel wireless adapters, and is known to cause BSODs on some PCs.
There are a few different ways to fix this problem, depending on your technical knowledge and comfort level. The easiest way is to simply uninstall the faulty driver and then reinstall it from scratch. However, if you’re not comfortable with manually updating drivers, you can also use a driver update tool to automate the process.
In this article, we’ll show you how to fix random BSODs caused by the netwsw02.sys driver file on Windows 10.
What are BSODs?
BSODs, or blue screens of death, are one of the most frustrating and dreaded computer problems. They’re called “blue screens” because, well, they’re blue. They can happen for a variety of reasons, but most often they’re caused by hardware or driver problems.
If you’re getting BSODs on your Windows 10 machine, there are a few different ways to try to fix them.
First, you can try restarting your computer. This might seem like obvious advice, but a lot of times a simple restart will fix the problem.
If restarting doesn’t work, the next thing to try is to update your drivers. Outdated or corrupted drivers can sometimes cause BSODs. You can use Windows Update to check for updates, or you can go to the website of your computer’s manufacturer to download the latest drivers.
If updating your drivers doesn’t fix the problem, the next step is to try to repair your Windows installation. To do this, you’ll need to boot from a Windows installation disc or USB drive and select the “Repair your computer” option. This will launch the Windows Recovery Environment, which will allow you to try to repair your Windows installation.
If none of these methods work, the last resort is to perform a clean installation of Windows. This will erase all of the data on your hard drive, so make sure to back up your files before you do this.
Hopefully one of these methods will fix your BSOD problem. If not, you might need to contact a professional for help.
What Causes BSODs?
There are a variety of things that can cause a Blue Screen of Death (BSOD), and the error message caused by the Netwsw02.sys file is just one of them. Sometimes, a BSOD is caused by hardware failure, but more often than not, it’s caused by a software issue. When it comes to software, there are a number of things that can cause a BSOD, including driver issues, bad system files, and more.
If you’re getting BSODs caused by the Netwsw02.sys file, it’s likely because there’s a problem with the network driver that’s installed on your computer. You can try updating the driver to see if that fixes the problem, or you can try uninstalling and reinstalling the driver. If neither of those options work, you may need to contact the manufacturer of your network card for further assistance.
Another potential cause of BSODs is bad system files. These are usually caused by a recent change to your computer, such as a new driver installation, and can often be fixed by doing a System Restore to a point before the change was made. If you’re not sure how to do a System Restore, you can find instructions online.
Finally, if you’re still getting BSODs, it’s possible that there’s a more serious issue with your computer. In this case, you’ll need to contact a qualified computer technician for further assistance.
How to Fix BSODs?
The best way to fix BSODs is to use a professional tool that can scan your computer for errors and fix them automatically. There are many such tools available on the market, but we recommend using the one from Reimage.
This tool is very easy to use and it will fix the most common causes of BSODs, including the error caused by Netwsw02.sys. Simply download and run the tool, and it will do the rest.
If you are getting random BSODs caused by the netwsw02.sys driver, there are a few things you can try to fix the problem. First, try updating the driver. If that doesn’t work, you can try uninstalling and reinstalling the driver. Finally, if all else fails, you can try a clean install of Windows.
If you’re experiencing random BSODs caused by the Netwsw02.sys file, there are a few things you can do to try and fix the issue.
First, try updating your network drivers. If that doesn’t work, you can try disabling your network adapter and then re-enabling it.
If those two things don’t work, you can try uninstalling and then reinstalling your network adapter.
Finally, if none of those things work, you may need to contact your network adapter’s manufacturer for further assistance.